We need a lot of items in our daily lives, such as small jars of kitchen essentials like rice, oil, salt, and various seasonings. To make our lives more organized and convenient, many people choose to install wall cabinets for storage.
Determine the installation position of the hanging wall cabinet. A hanging wall cabinet is usually connected to the wall with two screws, so the screw position needs to be determined first. The position should be determined based on the installation height and the hole position of the cabinet, and the width of the cabinet from the side wall should be determined based on the edge margin of the tabletop. The tools needed to determine the installation position are mainly a tape measure and a color pen.
Drill holes with an impact drill. After determining the drilling position, an impact drill needs to be used to drill holes. Connect the impact drill to the power supply, and drill deep installation holes at the marked positions. Note that before drilling, make sure that there are no water pipes, electrical pipes, etc. in the drilling position.
Insert the adhesive pellets by hand hammer. Before connecting the screws, the expansion adhesive pellets need to be installed in the screw holes, which can better secure the screws. Hammer the adhesive pellets into the drill holes by hand.
Install the screws to connect the cabinet and the wall. After installing the adhesive pellets, connect the screw pieces to the cabinet and the wall. Then, the installer installs the screw drill bit on the impact drill and screws the screw into the wall.
Assemble the handle. After the wall cabinet is fixed to the wall, the last step is to install the cabinet handle. The installation of the handle is relatively simple. Tighten the handle and screw piece in the fixed position with a screwdriver.
When installing a wall cabinet, we need to pay attention not to damage the wall. We should keep the air flowing indoors, keep the cabinet dry, and extend its service life. Avoid getting wet, and if there are water droplets, wipe them dry with a cloth as soon as possible. Please do not let the cabinet touch the ground during installation. Soft materials should be placed under the cabinet to avoid scratches. During the installation process, be careful not to scratch the surface of the board with metal tools such as screwdrivers. This is the installation method and precautions for wall cabinets. It's so simple, right? With the help of wall cabinets, I believe your home will be more tidy and beautiful. Of course, you can also install wall cabinets in the bathroom, which can better plan the placement of bathroom supplies.
English
日本語
français
Deutsch
Español
italiano
português
Svenska
norsk
Latinae
malta
